Apple IPhone 9 Will Come with OLED Display As Per Rumors.

Apple is all set to launch iPhone 7S and 7S Plus with rumoured iPhone 8 and now we have rumours of Apple iPhone 9, which is expected to launch in 2018.As per rumour Apple iPhone 9 will have 5.28 inch & the higher variant will have 6.46-inch display both are OLED display.The Apple iPhone 9 will be using Samsung,s OLED panels.Samsung has already sold 180 million units to Apple. There are rumours of Samsung is building a new plant for OLED panels specifically for Apple.This year Apple is all set to announce the three models of the iPhone with iPhone 7S & 7S Plus and iPhone 8. As of now, we have to wait and take this news with a pinch of salt. SourceTED QUESTION

Why won't my PS3 display most of my pictures?

Check to see if the Sharp is HD. If it is, go to the PS3 menu and change the HD output so that it matches what your TV is set to display (720p, 1080p, etc.) If this does not work, make sure you plugged the hdmi cable in firmly, and check to see if you are in the right mode on your TV (should be component)

How to display a faceted-search menu where categories could contain just 1 or over 100 choices?

I suggest the following rules for the check-box filters:download bmml source - Wireframes created with Balsamiq MockupsIn addition, following Steve Wortham's suggestion - display range facets as a double slider controller (eg. Ratings).I think this should give you a good start. Try this layout, test with 2-3 users and iterate.

I have no tach or digital display mph ect on my GSXR 600 2009 nothing will light up on the display or tach?

Ceck the fuse for the instrument panel, this is about the only thing that you can check without consulting a mechanic. Usually a blown fuse will cause this,and also if your panel is all digital then it is also possible the the circuit board can be bad,a very expensive fix might i add,,,,,,.,,,,,,,,,,,,,,,,,,,,,,,,,

Unable to use laptop display since attaching monitor

So it looks like that Ubuntu on that Laptop is stuck in the external display mode

Multiplexing 4-digit 7-segment display is flickering

To avoid flickering of the segments, you really do need hard real time control of the multiplexing. Even small variations in the timing will be quite noticeable.Using the timer on the CPU should work quite well, but as you observed it seems a lot of hassle for one simple thing. Perhaps it's worth doing if it's not just a one-off thing you are making.Using a smart display, or making one by adding a small micro is probably the easier route. I would probably opt for the micro since it gives the most flexibility.

How exacly do you display Physical passion?

It is not something artificial that you can display at will. It should come from the inside, because of the chemistry and the action

Is there an app to display partition identifers?

Another choice, installed by default on 12.04:There are options to display fields, remove headers, etc.may also be useful, depending upon what you find easier to parse. I do not think it will be easy to find a standard utility to convert to the grub nomenclature. The shell program /usr/lib/grub-legacy/update-grub has some shell script functions that do the conversion

Need help...Monitor, desktop display problem?

Go to start button. Type are solution'. Click on adjust screen resolution. Make sure it's set to single scren display and your resolution is not more than you monitor can support. Try changing some of the settings. But what ever you do, do not set the resolution higher than what your screen can support

Windows 10: Laptop display refuses to turn off

The issue has been fixed in Windows 10 build 10586 released in November 2015. The display now turns off on its own when the machine is idle

How to disable Macbook Pro internal display when using external monitors

I use a very naive solution on a Macbook Air mid-2012: instead of using clamshell mode (closing the lid), I just press the brighness down button until the lowest level. For my surprise, the lowest level turns off the internal display. I do not know if this works for others models, but it works well for me.

Flip the image of OLED 128x64 0.96 inch display

SSD1306 support display flipping (mirroring) - need only change in initialization: COMSCANDEC to COMSCANINC or vice verasa.More info in datasheet and section: 10.1.14 Set COM Output Scan Direction (C0h/C8h)

Suitable low-power 10" graphical display options

It seems like your requirements have narrowed it down to a display type you already listed: e-ink. The others you mentioned all seem very experimental or in very specific applications.I do not know how many e-ink manufacturers there are, but "E Ink Corp. " has a 9. 7" prototype kit for sale (out of stock as of 2010 Nov 28). You might also be able to hack a Kindle DX (same 9.7" screen), not sure what is in them

Do you think the Fundies would object if I put my atheism display up at the public school?

All I have to say is if you do not want Christians to set up a display discussing the benefits and what not of religion then do not open the can of worms. People and their hypocritical ways are really starting to upset me. IF YOU DON'T LIKE THE WAY THIS COUNTRY IS THEN GET THE **** OUT!!!!

Gateway 22" monitor brings up display for few seconds then display goes dark?

Sounds like a bad back light.No fix for that,I hope you are under warranty

display a node in the sidebar region of another node

I think you might have heard about Views module, you can create a views block to get the child node and display it on the same page using Views

Prevent (or at least notify about) display names shorter than 3 chars

We no longer allow names of 2 characters.3 characters is the minimum name length, and this is enforced.However, users who have an existing 2 character name may retain it, but will be unable to copy their profile from site to site until they make their username at least 3 characters.Update: as of 14 September 2011, previously existing shorter display names have been padded with dots.

How to display the last user logged in Windows 7 PRO x64 logon

tl;dr:Explanation:so after some googling and messing around I found (thanks to ) how it's "done"Thing is, Windows fails to build user list for LogonUI display if any of keys in HKLM/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProfileList do not have at least values with names: Flags, ProfileImagePath and State. Then it falls back to showing only Last logged on user and "Other users" button for manual enter of username.So, to cause this behavior, just add any subkey to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProfileList without any values and you are good. Remove to restore. I advise calling the new key some way it's clear why it's there and what it does.And of course, if you have this problem and want to restore user list, check all ProfileList subkeys and and remove ones do not have these 3 values (usual warning: handle registry carefully and backup before doing this of course, aside from accidental errors there are ways to hide user accounts from logon screen even if list can be read, so if you only have one user for example, and it's hidden using SpecialAccounts, you wo not be able to logon after restoring user list, because there wo not be any users!)

Use an iMac 5k or iMac 4k 2017 as a target display with Macbook Pro retina early 2013

According to this article on AppleInsider the 2017 4K and 5k iMacs do not support target display mode

What is better to display the sub categories? Roll-over or click?

I think its a better user experience to just display the top level/parent categories and then show sub navigation on those pages. It removes the clutter from the main navigation thus not presenting the visitor with 500 different sub level and sub sub level navigation.Of course, it depends on the store and the range of products. But another benefit is this also keeps authority in the most important/top level pages of your website rather than leaking this to so many other deeper category pages

Is it possible for Conky to display Time in words and not in numbers?

Could not you create a symbol-font which consists of images of the written word for every numeral? Than you should just have to choose this font (if possible) for the display of time

I bought a used VCR: RCA VR603AHF (1995), and it has no digital display. Is this possible? No display at all? Or is something wrong with it?

A lot of VCR's had nothing but transport control buttons, a volume knob (maybe) and a tape transport counter. Oh, and a tape release lever or button of some sort, occasionally. Winkie lights were not considered um, essential for playing a tape.

Is there a way of saving a pic in my display images to my system? I accidentally deleted it.?

hmmm, maybe you can use “Print Screen“ key when your open your “My display image...“ at YM screen and paste to mspaint then save as Jpeg file

What is the oddest thing youu2019ve put on display in your home?

I use old wood pulleys and rope, skeleton keys hanging in clumps by the door and a Victorian counter ringer to call for dinner guests. Tiny mosquitoes made from fine wire and wings cut from plastic bottles are attached to the silk waterlilies I made. I adorned a set of built-in cabinet drawers with driftwood handles, in my main room. I have a collection of crystal balls usually on my rugs. They move around. Come to think of it, most of what I like is odd. u200dWhat is the oddest thing youu2019ve put on display in your home?.

In find result window of Notepad, display multiple line results

Try the following. Let's say your document starts with the word INFO and ends with 999.Your regex would be:In order for this to work with MULTI LINES, in the search window, right next to the tick for using Regular expression, there's a checkbox that says . matches newline. You need to have it selected for it to work. p. s. Checked that it works on my Notepad version 7.5.1p.s.2 The find only returns the 1st line of each occurrence. So if your match starts at line 5, but ends in line 10, it will display on the search window that it starts at line 5. You can not change that behavior in the application

When should I use my display's native gamma over the standard 2.2?

Setting display gamma to 2.2 or sRGB (in LCD OSD settings, that is) will make it closer to perceptually uniform (i.e. efficient for be used by human) and also make 8 bit images with gamma 2.2 or sRGB expose less banding (bigger colour depth) when viewed at 100%. However, there is a problem, at least with DisplayCAL: creating profile for gamma 2.2 means that 1D LUT will be created. This 1D LUT can be applied in two ways:Here comes the problem. Assume that you have an 8bit LCD which does not have gamma correction at all (or does not allow the gamma to be set enough closely to taget) and also does not use editable internal 1D LUT. If you calibrate your LCD for gamma 2. 2 the DisplayCAL will make your LCD loose colour depth because it does not offer any interactive gamma adjustment. Therefore your LCD wo not even be 8bit anymore (more like 7,5bit, for example).If your entire workflow is 16bit there is zero sense in creating 1D LUT. However, since most LCDs have extra contrast, you may set your LCD gamma to compensate for it BEFORE profiling and then create profile for gamma "As measured".Creating 1D LUT for video card (8bit to 8bit) will only cut your colour depth